I have made more versions of my Tie Dye Helper “C” I use to fold and measure my designs. The measuring holes are 20mm or 1-inch separation, you decide.
Use these to help keep each fold perfect, or help with those complex folds.
Use the holes to measure distances.
Use the holes to trace our circles. Place something to hold a center then a marker in the hole distance you want and spin around.
The following angles are available. The custom version is easy to make if you need a special angle or hole separation.
RULER_C_45deg 120g 3.5hr $22.50 Unfinished, $23.85 Finished ready to use.
RULER_C_30deg 101g 3hr $19.10 Unfinished, $20.30 Finished ready to use.
RULER_C_12.5deg 87g 2.5hr $16.20 Unfinished, $17.25 Finished ready to use.
RULER_C_18deg 77g 2.3hr $14.60 Unfinished, $15.50 Finished ready to use.
RULER_C_15deg 70g 2.08hr $13.24 Unfinished, $14.14 Finished ready to use.
RULER_C_11.25deg 59g 1.8hr $10.90 Unfinished, $11.80 Finished ready to use.
RULER_C_10deg 55g 1.72hr $10.66 Unfinished, $11.56 Finished ready to use.
RULER_C_9deg 52g 1.38hr $9.34 Unfinished, $10.24 Finished ready to use.
RULER_C_7deg 47g 1.5hr $9.20 Unfinished, $10.10 Finished ready to use.
RULER_C_6deg 42g 1.4hr $8.40 Unfinished, $9.30 Finished ready to use.
RULER_C_5deg 38g 1.25hr $7.55 Unfinished, $8:45 Finished ready to use.
RULER_C_3deg 31g 1hr $6.10 Unfinished, $7.00 Finished ready to use.
As before the source files can be downloaded from my website for free for your personal use. If you choose to 3D print for your own commercial use please consider a small donation. At this time I’m the only one to sell them 3D printed.
Made-to-order items are made in order of payment. Due to the sizes of these items, shipping will require a large USPS box or tube. You will be sent an invoice for shipping once all parts are ordered. In domestic shipping plan on @ 10-$20 to start with. Shipping cost will be the actual cost of shipping not the handle fee of mine.
Contact me if Interested, I accept Pay-Pay and Venmo.
More coming!
Recommend 3D printing settings, post-work
Solid print.
1st layer all walls (outside walls, hole walls should not be shown on 1st layer. The idea is a true solid 1st layer helps the printing process.
Remove 1st layer in the hole areas.
Deburr all sides.
Sand any thing that might snag fabric. You do not need a mirror-smooth finish.
