LEGO.Forums

You will find the Beta versions of the LDraw.xml on this forum post.

The 4.x versions are the version I’m currently working on. Once this version is somewhat complete I will make a Public version. This 4.x version is being built from the ground up, as I add LDD part groups I will verify the parts from the older beta version. And then add these parts to this new version.

You only need to download the ldraw_423.zip and apply to your system. The .LXF files are just the files for LDD for each parts group as I work on them. One of the below parts group includes Baseplates that are not currently in LDD. to use them just import into your models.

View below posts to view the details of each LDD group of parts.

Parts that are yellow are working correctly,
Green need some work,
Dark Gray parts are not working, or do not have an LDraw part yet.

Currently 4.23 is the current beta version.

Version 4.23

Parts in LDD 604.1 = 2,339  
Working Parts 1,269
Parts that need work 196

working / needs work / total in LDD  

01   Bricks       33/1/35  
02   Round       42/1/45  
03   Mod Bricks     61/0/64  
04   Technic       21/0/21  
05   Slopes       48/0/49  
06   Slopes b     45/1/46  
07   Arch       41/0/42  
08   Plates       44/0/45  
09   Angle Plates   64/2/69  
10   Mod Plates     106/10/128
11   Panel       66/6/77  
12   Windscreen     56/13/78  
13   Doors       81/8/101  
14   tires       75/12/94
15   Mini Misc       104/-/318     15a     15b     15c
16   minifigs     116/14/438   16h 74/3/153   16a2   29/6/166   16b2 13/5/68
17   Mod Parts     120/34/260   17a 65/20/116   17b 54/14/127   17c` 1/0/18
18   NXT         7/1/25  
19   liftarm       15/0/15  
20   liftarm       14/0/14  
21   Technic       75/57/124
22   Gears       25/6/41  
23   Cable & Pipe 0/-/38  
24   Baseplate       10/5/16  
25   Ball joint       0/7/39  
26           0/-/107
27     0/-/8
28     0/-/2

*** get emails on updates, just join site, need valid email. NO spam or the reuse of your emails. then subscribe to this tread.

Enjoy,

Gallagher

From LDD Parts group 01 “Bricks” (33/1/35)
These parts are in Version 4.22

Brick 2 x 2 Corner 2357.dat
Brick 1 x 1 x 5 2453.dat
Brick 1 x 2 x 5 2454.dat
Brick 2 x 6 2456.dat
Brick 1 x 16 2465.dat
Brick 2 x 4 3001.dat
Brick 2 x 3 3002.dat
Brick 2 x 2 3003.dat
Brick 1 x 2 3004.dat
Brick 1 x 1 3005.dat
Brick 2 x 10 3006.dat
Brick 2 x 8 3007.dat
Brick 1 x 8 3008.dat
Brick 1 x 6 3009.dat
Brick 1 x 4 3010.dat
Brick 2x4x3 30144.dat
Brick 2 x 2 x 3 30145.dat
brick 1x4 3010.dat
Brick 1 x 2 without Centre Stud 3065.dat
Brick 1 x 2 x 2 with Post 3245a.dat
Brick 1 x 3 3622.dat
brick 4x18 30400.dat
Brick 1 x 6 x 5 3754.dat
Brick 1 x 3 x 5 3755.dat
Brick 8 x 8 L 4201.dat
brick 4x12 4202.dat
Brick 8 x 16 4204.dat
Brick 1 x 10 6111.dat
Brick 1 x 12 6112.dat
Brick 4x10 6212.dat
brick 2x6x3 6213.dat

Brick 12 x 24 30072
Brick 2x4x3 97492
Brick 2x8 93888

From LDD Parts group 02 “Round” (42/1/45)
These parts are in Version 4.22

Brick 1 x 1 x 6 Round with Square Base 43888.dat
Wedge 4 x 2 Right 41767.dat
Wedge 4 x 2 Left 41768.dat
Brick 3 x 3 Facet 2462.dat
Brick 5 x 5 Facet 6107.dat
Brick curved 2x2 round ld 45417.dat
Cone 1 x 1 with Stop 59900.dat
Brick 1 x 1 Round with Hollow Stud 3062b.dat
Castle Turret Top 4 x 8 x 2 & 1/3 6066.dat
Brick 4 x 4 Round 87081.dat
Cone 2 x 2 x 2 with Hollow Stud 3942b.dat
Cone 3 x 3 x 2 6233.dat
Brick 2 x 2 Round 6143.dat
Cylinder 2 x 2 x 2 Robot Body 30361.dat
Cylinder 2 x 2 with Dome Top 553.dat
Cone 1x1 6188.dat
Boat Mast Base 4 x 4 x 9 4844.dat
Cone 4 x 4 x 2 3943.dat
Column 2x2x11 6168a.dat
Brick 4x10 without Two Corners 30181.dat
Wedge 3 x 4 With Stud Notches 50373.dat
Brick 3 x 3 without Corner 30505.dat
Cone 4x4x2 Hollow No Studs 4742.dat
Brick 4 x 4 Corner Round 2577..dat
Cylinder 3 x 6 x 2 2/3 Horizontal 30360.dat
Wedge 3 x 2 Right 6564.dat
Wedge 3 x 2 Left 6565.dat
Brick 4 x 4 Round with Holes 6222.dat
Cylinder 2 x 2 x 1 & 2/3 with Dome Top 30151.dat
Brick 4 x 4 Round Corner 48092.da
Tile 2 x 2 Round with Globe 2 x 2 x 2 30106.dat
Brick 2 x 2 Corner Round 3063.dat
Turret 7 x 7 x 2 & 1/3 Quarter 6072.dat
Brick 2 x 2 Facet 87620
Brick 2 x 2 Round with Grille 92947
Cone 1 x 1 4589

Unofficial LDraw Parts
Dome 4 x 4 Smooth 86500
Wheel Technic 20 x 30 4266.dat
Brick 12 x 12 Corner Round 6162.dat
Brick 4 x 8 Round Half Circle 47974.dat
Brick Round Corner 6 x 6 x 2 87559
Brick 3 x 3 x 2 Corner Curved 88293
Brick 6 x 6 Corner Round with Slope 33 Chamfer (Needs Work) 95188

No LDraw Parts
33176.dat

From LDD Parts group 03 “Mod Bricks” (61/0/64)
These parts are in Version 4.22

Brick 1 x 2 Log 30136.dat
Hinge Brick 1 x 2 Locking with Single Finger on End Horizontal 30541.dat
Brick 1 x 2 with Studs on Two Opposite Sides 52107.dat
Brick 1 x 2 x 2/3 with Studs on Sides 4595.dat
Brick 1 x 2 with Pin 2458.dat
1x2 with groove 4216.dat
Brick 2x2 no studs with pin vertical 4729.dat
Cone 2x2x 1&2/3 Octagonal 6039.dat
Brick 1 x 1 with Handle 2921.dat
Brick 1 x 1 with Studs on Two Opposite Sides 47905.dat
Brick 1 x 1 with Headlight 4070.dat
Brick 2 x 2 x 6 with Groove 6056.dat
Hinge Brick 2 x 2 Locking with Single Finger on Side and No Axlehole 30389a.dat
Hinge Brick 1 x 2 Locking Double 30386.dat
Bracket 5 x 2 x 2 & 1/3 6087.dat
Technic Brick 2 x 2 with Hole and Rotation Joint Ball Half Top Horizontal 48170.dat
Brick 2 x 2 with Pin and Axlehole 6232.dat
Hinge Brick 1 x 2 Locking with Dual Finger on End Vertical 30365.dat
Hinge Brick 1 x 2 Locking with Dual Finger Horiz. Single Vert. 47975.dat
Brick 1 x 1 with Clip Horizontal 60476.dat
Hinge Brick 1 x 2 Locking with Dual Finger on End Horizontal 30540.dat
Brick 1 x 2 with Grille 2877.dat
Brick 1 x 1 with Stud on 1 Side 87087.jpg
Technic Brick 2 x 2 with Hole, Rotation Joint Ball 1/2 V 48171.dat
4732 Bracket 8 x 2 x 1 & 1/3 4732.dat
Support 2 x 16 x 2 Girder Triangular 30518.dat
Technic Brick 2 x 3 w/ Hole, Click Rot. Hinge (H), and Socket 47454.dat
Robot Leg 30362.dat
Slope Brick 45 4 x 2 Double Inverted with Pins 30390.dat
Brick 1 x 1 x 3 with Two Clips Vertical 60583.dat
Brick 2 x 2 with Pins and Axlehole 30000.dat
Hinge Brick 1 x 4 Top 3830.dat
Brick 4x7x3 with plate 30250.dat
Brick 1 x 4 with Studs on Side 30414.dat
Brick 2 x 2 x 2 with 2 Holes and Click Ring 41533.dat
Hinge Brick 1 x 4 Base 3831.dat
Hinge Brick 2 x 2 Locking with Axlehole and Dual Finger 40902.dat
Brick 2 x 4 x 2 with Studs on Sides 2434.dat
Technic Brick 1 x 2 with Axlehole 32064.dat
Brick 1 x 2 with Clip Vertical 30237.dat
Hinge Brick 1 x 4 Locking Double 30387.dat
Brick 1 x 1 with Studs on Four Sides 4733.dat
Brick 1 x 2 with Handle 30236.dat
Hinge Brick 1 x 2 Locking with Single Finger on End Vertical 30364.dat
Brick 1 x 1 with Clip Vertical 60475.jpg
Technic Brick 2 x 3 with Holes, Vertical Click Rotation Hinge, and Socket 47432.dat
Hinge Brick 1 x 2 Locking with Single Finger On Top 989.dat
1x2 with Double snap 30526.dat
Brick 1 x 4 Log 30137.dat
2336.dat
Crane Arm Truss Middle Section 1 x 6 x 5 64448.dat
Brick 2 x 2 with Two Ball Joints 57908.dat
Support 2 x 2 x 10 Girder Triangular 30517.dat
Brick 2x2x3 &1/2 Octangonal 6037.dat
Lattice Tower 2x2x10 with Cross 58827.dat
Brick 2 x 4 with Pins 6249.dat
Bottom 6x6x1 1/3 4597.dat
Technic Brick 2 x 2 w/ Hole, Click Rot. Hinge (H), and Socket 47452.dat
Technic Brick 2 x 2 with Hole and Rotation Joint Socket 48169.dat
Brick 2 x 2 with Vertical Pin and 1 x 2 Side Plates 30592.dat
1x14 with Groove 4217.dat
Brick 2 x 2 with Ball Joint and Axlehole 57909.dat
Crane Arm Truss Top Section 1 x 6 x 10 64449.dat
6061 Tube Brick 2x4x2 6061.dat
Brick 1 x 4 with Groove 2653.dat
52038 Brick 2x4x1 2/3 with vert knobs 52038.dat
Brick 2 x 3 x 1 & 2/3 Octagonal Offset 6032.dat
Brick 1 x 2 with Embossed Bricks 98283

 
Unofficial LDraw Parts
Brick 12 x 12 with 3 Pin Holes on Sides & Axle Holes in Corners 52040.dat
Brick 2 x 2 with Ball Socket and Axlehole 62712.dat
Technic Brick 2 x 2 with Hole and Two Rotation Joint Sockets 48172.dat
Engine 2 x 4 x 4 30535

No LDraw Parts
95820
76766
92013

From LDD Parts group 04 “Technic” (21/0/21)

These parts are in Version 4.22

Technic Brick 1 x 8 with Holes 3702.dat
Technic Brick 4 x 4 with Open Center 2 x 2 32324.dat
Technic Brick 6 x 8 with Open Center 4 x 6 32532.dat
Technic Forklift Fork 2823.dat
Technic Brick 1 x 4 with Holes 3701.dat
Technic Link 9L Bent 6:4 64451.dat
Technic Brick 1 x 2 with Holes 32000.dat
Technic Brick 1 x 1 with Hole 6541.dat
Technic Brick 1 x 16 with Holes 3703.dat
Technic Wing Front 2743.dat
Technic Brick 1 x 6 with Holes 3894.dat
Technic Brick 1 x 2 with Hole 3700.dat
Technic Brick 4 x 2 with Open Center 2 x 4 40344.dat
Technic Brick 5 x 5 Corner with Holes 32555.dat
Technic Brick 1 x 12 with Holes 3895.dat
Technic Brick 1 x 14 with Holes 32018.dat
Technic Brick 1 x 10 with Holes 2730.dat
Technic Wing Back 2744.dat

Unofficial LDraw Parts
Technic Brick 1 x 2 with Two Liftarms 85943.jpg
Technic Block Connector 5 x 3 x 1 (Cylinder housing) 32333.dat

From LDD Parts group 05 “Slopes” (48/0/49)
These parts are in Version 4.22

Slope Brick 33 3 x 1 4286.dat
Slope Brick 45 2 x 2 3039.dat
Wedge 2 x 12 Triple 3038.dat
Slope Brick 33 3 x 2 3298.dat
Slope Brick 45 2 x 1 Inverted 3665.dat
Slope Brick 33 3 x 3 4161.dat
Slope Brick 45 2 x 6 x 2/3 2875.dat
Roof Tile Plateau 2x10x2 30180.dat
Slope Brick 45 2 x 1 Double 3044.dat
Slope Brick 17 2 x 1 x 2/3 Grille 61409.dat
Slope Brick 31 1 x 1 x   2/3 50746.dat
Roof Tile 1x6x5 30249.dat
Slope Brick 18 4 x 2 30363.dat
Slope Brick 75 2 x 1 x 3 Inverted 2449.dat
Slope Brick 33 3 x 3 Double Convex 3675.dat
Slope Brick 45 2 x 2 Double 3043.dat
Slope Brick 75 2 x 1 x 3 4460.dat
Slope Brick 45 2 x 1 3040B.dat
Slope Brick 65 2 x 1 x 2 missing ldr parts 60481.dat
Slope Brick 33 2 x 2 Double 3300.dat
roof tile slope 1 x 2 2/3 85984.dat
Train Roof 6 x 6 4509.dat
Slope Brick 45 2 x 4 Double 3041.dat
Slope Brick 45 6 x 4 Double 32083.dat
Slope Brick 65 2 x 2 x 2 without Centre Tube 3678.dat
Slope Brick 45 2 x 4 Double 3299.dat
Slope Brick 75 2 x 2 x 2 Quadruple Convex 3688.dat
Slope Brick 45 2 x 2 Inverted 3660.dat
Slope Brick 45 2 x 4 3037.dat
Slope Brick 45 2 x 2 Double Concave 3046.dat
Slope Brick 45 3 x 1 Inverted Double 2341.dat
Slope Brick 45 2 x 2 Inverted Double Convex 3676.dat
Slope Brick 45 4 x 2 Double Inverted 4871.dat
Slope Brick 3049.dat
Slope Brick 18 4 x 1 60477.dat
Slope Brick 33 3 x 1 Inverted 4287.dat
Slope Brick 45 1 x 2 Triple 3048.dat
Slope Brick 75 2 x 2 x 3 30499.dat
Slope Brick 10 6 x 8 4515.dat
Slope Brick 75 2 x 2 x 3 Double Convex 3685.dat
Slope Brick 45 2 x 8 4445.dat
Slope Brick 33 3 x 4 3297.dat
30183.dat
Slope Brick 45 6 x 1 Double Inverted with Open Center 52501.dat
Slope Brick 33 3 x 2 Inverted 3747.dat
Slope Brick 45 4 x 4 Double Inverted with Open Center 4854.dat
Slope Brick 45 2 x 1 with Plate 1 x 1 92946

Unofficial LDraw Parts
Slope Brick 45 6 x 4 Double Inverted with Center Holes 60219.dat

No LDraw Parts
72454

From LDD Parts group 06 “Slopes b” (45/1/46)
These parts are in Version 4.22

Wedge 2 x 6 Double Inverted Right 41764.dat
Wedge 2 x 6 Double Inverted Left 41765.dat
Train Roof 6 x 6 Double Slope 45 / Slope 33 2876.dat
Wedge 12 x 3 x 1 Double Rounded Right 42060.dat
Wedge 12 x 3 x 1 Double Left 42061.dat
Wedge 16 x 4 Curved Triple 45301.dat
Wedge 2 x 6 Double Right 41747.dat
Wedge 2 x 6 Double Left 41748.dat
gable element 1x3x3 1/3 6044.jpg
Wedge 2 x 4 Triple 47759.dat
Wedge 2 x 4 Triple Left 43710.dat
Wedge 2 x 4 Triple Right 43711.dat
Cockpit 4 x 11 x 2 & 2/3 6058.dat
Wedge 2 x 12 Triple 30382.dat
Boat Base 8 x 10 2622.dat
Wedge 4 x 4 Triple without Stud Notches 6069.dat
Slope Brick 45 3 x 4 Double / 33 4861.dat
2463.dat
Wedge 4 x 4 4858.dat
Wedge 4 x 2 Sloped Right 43720.dat
Wedge 4 x 2 Sloped Left 43721.dat
Wedge 6 x 8 x 2 Triple Inverted   41761.dat
Slope Brick 65 6 x 6 x 2 Inverted Quadruple 30373.dat
Wedge 6 x 4 Inverted 4856.dat
Brick 10 x 10 Corner Round with Tapered Edge and Cutout 58846.dat
Wedge 6 x 4 6153.dat
Slope Brick Round 3 x 8 x 2 Right 41749.dat
Slope Brick Round 3 x 8 x 2 Left 41750.dat
Wedge 6 x 4 Triple Curved 43712.dat
Wedge 10 x 3 x 1 Double Rounded Left 50955.dat
Wedge 10 x 3 x 1 Double Rounded Right 50956.dat
Wedge 4 x 4 Triple Curved without Studs 47753.dat
Wedge 6 x 4 Inverted with Curved Bottom 43713.dat
Windscreen 8 x 6 x 2 Curved 41751.dat
30201.dat
Wedge 4 x 4 Triple Inverted 4855.dat
Wedge 4 x 4 Corner 43708.dat
Wedge 4 x 3 Curved Triple Slope with Notches and No Studs 64225.da
Windscreen 6 x 10 x 2 Curved 45705.dat
30320.dat
Brick 3 x 3 x 2 Facet Bottom 2464.dat
Slope Brick 45 4 x 4 Double with Hinge 4857
Slope Brick 33 5 x 6 x 2 Inverted 4228

Unofficial LDraw Parts
Slope Front 6 x 8 32084.dat
Cockpit 6 x 10 x 2 Curved 47406.dat

From LDD Parts group 07 “Arch” (41/0/42)
These parts are in Version 4.22

Brick 1 x 3 x 2 Curved Top 33243.dat
Arch 1 x 4 x 2 6182.dat
Arch 1 x 5 x 4 2339.dat
Brick with bow 1x5x4 inv 30099.dat
Arch Brick 1 x 3 x 2 6005.dat
Slope Brick Curved 4 x 1 61678.dat
Arch Brick 1 x 3 4490.dat
Brick 2 x 1 x 1 & 1/3 with Curved Top 6091.dat
54091 Bow Bottom 8x8x2 54091.dat
Arch 1 x 8 x 2 3308.dat
brick w arch 1x1x3 1/3 6060.dat
Brick 2 x 2 with Curved Top and 2 Studs on Top 30165.dat
Slope Brick Curved 6 x 1 Inverted 500.dat
Brick 1 x 4 x 1 & 1/3 with Curved Top 6191.dat
Slope Brick Curved 3 x 1 50950.dat
Technic Cylinder 6 x 8 x 4 Flattened Upper Half 45411.dat
Brick 2 x 4 x 1 & 1/3 with Curved Top 6081.dat
Arch 1 x 6 x 2 3307.dat
Arch 2 x 12 x 6 with Grooves 30272.dat
Slope Brick Curved 10 x 1 85970.dat
Slope Brick Curved 2 x 8 x 2 41766.dat
Arch 1 x 3 x 2 88292.dat
Arch 1 x 6 x 2 with Curved Top 6183.dat
Arch 1x12x3 6108.dat
Arch 1 x 6 3455.dat
Slope Brick Curved 6 x 2 44126.dat
Brick 2 x 3 with Curved Top 6215.dat
Arch 1 x 4 3659.dat
Bow top 8x8x2 54095.dat
Technic Cylinder 6 x 8 x 4 Flattened Lower Half 45410.dat
Brick 4x4x2 with Bow 61487.dat
Brick 2 x 4 with Curved Top 6192.dat
Slope Brick 4 x 1 Double Curved No Studs 93273
76768

Unofficial LDraw Parts
Slope Brick Round 8 x 8 Double with Cutout 54096.dat
Cockpit 4 x 10 x 2 Curved 47846.dat
Slope Brick 4 x 2 Curved No Studs 93606

From LDD Parts group 08 “Plates” (44/0/45)

These parts are in Version 4.22

Plate 2 x 2 Corner 2420.dat
Plate 2 x 3 3021.dat
Plate 1 x 6 3666.dat
Plate 2 x 8 3034.dat
Plate 1 x 3 3623.dat
Tile 4 x 6 with Studs on Edges 6180.dat
Brick 1 x 2 with Handle 3023.dat
Tile 1 x 2 with Groove 3069.dat
Tile 1 x 1 without Groove (Old Style)  30039.dat
Plate 2 x 12 2445.dat
Plate 2 x 16 4282.dat
Plate 6 x 6 3958.dat
Tile 1 x 8 4162.dat
Tile 1 x 4 2431.dat
Tile 2 x 4 with Groove 87079.dat
Tile 2 x 2 with Groove 3068.dat
Plate 1 x 1 3024.dat
Tile 2 x 3 with Horizontal Clips 3035.dat
Plate 6 x 12 3028.dat
Plate 6 x 14 3456.dat
Tile 6 x 12 with Studs on Edges 6178.dat
Plate 4 x 8 with Studs in Centre 6576.dat
        Scala Tile 6 x 6 6881.dat 10
Plate 1 x 8 3460.dat
Plate 4 x 10 3030.dat
Plate 1 x 10 4477.dat
Plate 8 x 8 41539.dat
Plate 2 x 4 3020.dat
Plate 2 x 2 3022.dat
Plate 2 x 6 3795.dat
Plate 1 x 12 60479.dat
Plate 1 x 4 3710.dat
Plate 2 x 10 3832.dat
Tile 1 x 6 6636.dat
Tile 1 x 3 with Groove 63864.dat
plate 6 x 16 with 26 knobs 6205.dat
Plate 4 x 4 Corner 2639.dat
Plate 4 x 12 3029.dat
Plate 6 x 24 3026.dat
64799.dat
Tile 8 x 16 48288.dat
Plate 6 x 8 3036.dat
Tile 4 x 4 with Studs on Edge 6179.dat
3033.dat
Plate 6 x 16 3027.dat
Plate 4 x 4 3031.dat
Wheel Hard with Treads 3032.dat
Plate 16 x 16 91405.dat

No LDraw Parts
Plate 2x2 94148

From LDD Parts group 09 “Angle Plates” (64/2/69)

These parts are in Version 4.22

Wing 2 x 4 51739.dat
Round Dish 3 x 3 Inverted 43898.dat
Plate 4 x 4 without Corner 30503.dat
Plate 4 x 6 without Corners 32059.dat
Wing 4 x 8 Tail 3474.dat
Plate 2 x 2 Round with Wheel Holder 2655.dat
Plate 6 x 6 with Round Corner 6003.dat
Plate 2 x 2 Round 4032.dat
Round Dish 2 x 2 2654.dat
Plate 1 x 1 Round 4073.dat
Wing 4 x 9 2413.dat
Wing 3 x 6 Right 54383.dat
Wing 3 x 6 Left 54384.dat
Round Dish 6 x 6 Inverted Webbed   4285b.dat
Plate 8 x 8 without Corner 30504.dat
Plate 6 x 6 x 2/3 Cross with Dome 30303.dat
Tile 2 x 2 Round with Lifting Ring 2376.dat
Wing 3 x 4 with 1 x 2 Cutout with Stud Notches 48183.dat
Wing 2 x 3 Right 43722.dat
Wing 2 x 3 Left 43723.dat
Tile 2 x 2 Round 4150.dat
Corner Plate 10x10 2401.dat
Tile 8 x 8 Round with 2 x 2 Center Studs 6177.dat
Plate 4 x 4 Corner Round 30565.dat
Wing 3 x 8 Right 50304.dat
Wing 3 x 8 Left 50305.dat
Wing 4 x 4 with 2 x 2 Cutout 43719.dat
Round Dish 4 x 4 Inverted 3960.dat
Plate 4 x 4 Round 60474 50987 ??? round hole and axle both use this as a round hole 60474.dat
Round Dish 6 x 6 Inverted 9 45729.dat
Plate 6 x 6 Octagonal Open Center 30062.dat
Wing 2 x 4 Right 41769.dat
Wing 2 x 4 Left 41770.dat
Plate 3 x 6 without Corners 2419.dat
Boat Base 6 x 6 2626.dat
Plate 3 x 3 without Corner 2450.dat
Plate 3 x 3 Corner Round 30357.dat
Round Dish 2 x 2 Inverted 4740.dat
Round Dish 8 x 8 Inverted 3961.dat
Plate 10 x 10 Octagonal Open Center 6063.dat
stern plate 12 x 8 47405.dat
Wing 8 x 6 x 2/3 30036.dat
Wing 16 x 14 Shuttle 6219.dat
Plate 6 x 6 without Corner 6106.dat
Wing 6 x 12 Left 30355.dat
Wing 6 x 12 Right 30356.dat
Wing 7 x 12 Left 3586.dat
Boat Mast Platform 2539.dat
Boat Base Bow Plate 10 x 9 2621.dat
Boat Base Bow Plate 6 x 7 with Stud Notches 50303.dat
Wing 7 x 12 Right 3585.dat
Wing 4 x 6 with 2 x 2 Cutout 47407.dat
Wing 3 x 12 Left 47397.dat
Wing 3 x 12 Right 47398.dat
Plate 10 x 10 without Corners 89523
Plate 10 x 10 without Corner without Studs in Center 92584
Wing 4 x 8 Left 3933
Wing 4 x 8 Right 3934
Wing 4 x 4 Right 3935
Wing 4 x 4 Left 3936
Wing 8 x 4 - 2 x 3 & 1/3 Up 30118
Wing 8 x 8 with 3 x 4 Cutout 6104
Scala Cone 5 x 5 6942
90194
Plate 1 x 1 Round with Open Stud 85861

Unofficial LDraw Parts
Round Dish 10 x 10 Inverted 50990.dat
Electric Light Reflector Round 2 x 2 x 2/3 Chrome 71128.dat

No LDraw Parts
Bracket 1 x 2 - Dish 4 x 4 74698

From LDD Parts group 10 “Mod Plates” (106/10/128)
These parts are in Version 4.22

30042.dat
4211.dat
Plate 6 x 6 Hexagonal with Six Spokes and Clips 64566.dat
Technic Plate 2 x 8 with Holes 3738.dat
Technic Rotor 3 Blade with 6 Studs 32125.dat
Technic Plate 2 x 4 with Holes 3709B.dat
87580.dat
30041.dat
Animal Horse Hitching 2397.dat
Train Base 6 x 34 Split-Level 2972.dat
Technic Plate 2 x 6 with Holes 32001.dat
30586.dat
52036.dat
Technic Beam 2 with Two Antistuds 32530.dat
2342.dat
Bracket 2 x 3 - 2 x 2 4598.dat
Car Base 7 x 4 x 2/3 2441.dat
Train Base 6 x 28 with 2 Square Cutouts and 3 Round Holes Each End 92339.dat
Tile 2 x 2 with Pin 2460.dat
2680.dat
47720.dat
Plate 1 x 1 with Clip Horizontal 616019.dat
Plate 1 x 1 with Clip Horizontal 6019.dat
Plate 1 x 1 with Clip Vertical - Type 3 4085c.dat
60470.dat
Car Base 10 x 4 x 2/3 with 2 x 2 Center 4212.dat
Hinge Plate 1 x 2 Locking with Single Finger on Side Vertical 44567.dat
Hinge Plate 1 x 2 Locking with Dual Finger on Side 60471.dat
44570.dat
Hinge Plate 1 x 4 Base 2429.dat
Hinge Plate 1 x 4 Top 2430.dat
Plate 1 x 2 with Arm 4623.dat
Space Stand 2 x 2 x 2 3940.dat
Plate 2 x 2 with Rod Frame Octagonal 30033.dat
Plate 1 x 2 with Ladder 4175.dat
Plate 1 x 1 with Clip Light - Type 2 4081b.dat
Plate 1 x 1 Round with Towball 3614.dat
Hinge Tile 1 x 3 Locking with Single Finger on Top 44300.dat
87609.dat
Car Base 10 x 4 x 2/3 with 4 x 2 Center 30029.dat
41862.dat
30094.dat
Car Mudguard 4 1/2 x 1 x 1 50947.dat
Plate 1 x 4 Offset 4590.dat
87913.dat
Bracket 2 x 2 - 2 x 2 3956.dat
Train Base 6 x 28 4093.dat
Plate 1 x 2 with Handles Type 2 3839b.dat
Plate 2 x 2 with Holes 2817.dat
32124.dat
Plate 2 x 2 with Wheel Holder 4488.dat
Plate 2 x 2 with Hole 2444.dat
Plate 2 x 4 with Pins 30157.dat
Plate 1 x 2 with Handle on End 60478.dat
Plate 2 x 2 with Pin Type 1 2476.dat
Hinge Plate 1 x 2 Locking with Dual Finger on End Vertical 44302.dat
Technic Beam 2 with Two Studs 32529.dat
Plate 2 x 2 with Wheel Holder Plane 2415.dat
Tile 1 x 2 Grille without Groove 2412b.dat
Bar 12L with Plate 1 x 2 and Hollow Stud 42445.dat
Tile 2 x 3 with Horizontal Clips 30350.dat
Space Wing 4 x 2 4596.dat
Support 2 x 4 x 5 Stanchion Inclined 4476.dat
Bracket 1 x 2 - 2 x 2 44728.dat
Plate 1 x 2 with Door Rail 32028.dat
Plate 1 x 2 with Long Towball 2508.dat
Hinge Plate 1 x 8 with Angled Side Extensions 30407.dat
Plate 2 x 2 with Towball 3731 3729.dat
Tile 1 x 1 with Clip 2555.dat
Plate 8 x 8 with Grille 4151.dat
Technic Plate 2 x 16 with Hole and Angled Side Extensions 62743.dat
Plate 2 x 2 with Flattened Towball Socket and Axlehole 63082.dat
Hinge Plate 1 x 2 Locking with Single Finger on End Vertical 44301.dat
Hinge Tile 1 x 4 Locking with 2 Single Fingers on Top 44822.dat
Plate 2 x 2 with Wheels Holder Wide 6157.dat
coupling plate 1x4 with ball 3184.dat
Plate 1 x 2 with Clip Horizontal on End 63868.dat
Hinge Plate 1 x 2 Locking with Single Finger on Top 30383.dat
Plate 1 x 4 with Wheels Holder 2926.dat
Plate 1 x 2 with 1 Stud 3794.dat
Plate 1 x 8 with Door Rail 4510.dat
Plate 2 x 2 with Towball Socket 3730.dat
Plate 3 x 2 with Hole 3176.dat
Hinge Plate 1 x 4 Locking with 2 Single Fingers on Side Vertical 44568.dat
Plate 2 x 2 with Wheels Holder 4600.dat
Car Mudguard 2 x 4 without Studs 3787.dat
Plate 1 x 4 with Towball Socket 3183.dat
48336.dat
Plate 1 x 2 with Handle 2540.dat
Bracket 1 x 2 - 1 x 4 2436.dat
Plate 1 x 2 with Arm Up 88072.dat
Hinge Train Gate 2 x 4 Locking 44569.dat
Car Mudguard 2 x 4 Swept Back 41854.dat
Plate 1 x 4 with Arm 30043.dat
Train Base 6 x 24 6584.dat
Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs 4276b.dat
Tile 8 x 16 with Bottom Tubes 90498.dat
Bracket 1 x 2 - 2 x 4 93274
Car Mudguard 2 x 4 with Hole 60212
10201
Plate 4 x 4 with Two Clips Horizontal 47998
Hinge Plate 1 x 2 with 3 Fingers and Hollow Studs 4275

Unofficial LDraw Parts
Slope Brick 45 4 x 4 Double with Locking Hinge 44571.dat
Hinge Plate 1 x 12 with Angled Side Extensions and Tapered Ends 57906.dat
Bracket 3 x 4 -  3 x 4 Up 98287
Car Mudguard 3 x 4 Overhanging 44674.dat
Car Base 16 x 6 with Recessed Center 52037.dat
Bracket 1 x 2 -  2 x 2 Up 99207
Plate 1 x 2 with Clip on Top 92280
Bracket 1 x 2 -  1 x 2 Up 99780
Plate 1 x 2 with Angled Handles on Side 92692
Hinge 2 x 2 Plate with 1 Locking Finger on Top 92582

No LDraw Parts
Scala Tile 6 x 6 6881.dat
98284
99784
Plate 1 x 1 with Clip Vertical type 60897.dat
95120
59489
98263
Train Base 6 x 34 Split-Level without Bottom Tubes 87058
92092
92088
Train Base 6 x 24 with Two 2 x 2 Cutouts 92340.dat